title R/C Car Modification
user shadow
ip 128.61.105.147
vol 1
lock ********

/bar
Ok, to start of with, I really wouldn't consider this being a project, cause I didnt really build anything from scratch, other than the electronic parts I put on the car itself and it only took a little over an hour to complete. But, oh well, I dont feel like adding another category.

Anyways, I bought this car for 18 dollars at Wally World, and I got the crazy idea to install LED's in the car. So I first had to drill out the holes. I drilled 2 holes where the brake lights where and 2 holes for the headlights. Then 2 more on the hood for the light switch and a blinking green led so i can see it from above in the dark.

While this was going on, i drilled four more holes on the bottom chassis to add under body LED's to simulate underbody neons. So with that all hooked up, I wired up everything and ran it into a 9v transformer battery that is glued to the body. Put the body back onn and walla, one pimp'in R/C Car Modification.

/gallery {

/imagefile Photo_169.JPG
TailLights With Installed LED's.

/imagefile Photo_170.JPG
Under Body LED's

/imagefile Photo_171.JPG
Wired Up Under Body

/imagefile Photo_172.JPG
Wiring Up Hood

/imagefile Photo_173.JPG
Finished Top LED and Switch

/imagefile Photo_178.JPG
Action Shot UnderBody

/imagefile Photo_179.JPG
HeadLight LED's

/imagefile Photo_180.JPG
TailLight Shot 2

/imagefile Photo_181.JPG
Top