Ok, to start of with, I really wouldn't consider this being a project, cause I didnt really build anything from scratch, other than the electronic parts I put on the car itself and it only took a little over an hour to complete. But, oh well, I dont feel like adding another category.
Anyways, I bought this car for 18 dollars at Wally World, and I got the crazy idea to install LED's in the car. So I first had to drill out the holes. I drilled 2 holes where the brake lights where and 2 holes for the headlights. Then 2 more on the hood for the light switch and a blinking green led so i can see it from above in the dark.
While this was going on, i drilled four more holes on the bottom chassis to add under body LED's to simulate underbody neons. So with that all hooked up, I wired up everything and ran it into a 9v transformer battery that is glued to the body. Put the body back onn and walla, one pimp'in R/C Car Modification.
|
|
TailLights With Installed LED's.
|
|
Under Body LED's
|
|
Wired Up Under Body
|
|
Wiring Up Hood
|
|
Finished Top LED and Switch
|
|
Action Shot UnderBody
|
|
HeadLight LED's
|
|
TailLight Shot 2
|
|
Top Shot 2
|
|